If you’re the proud owner of a Dodge Challenger and your push-to-start feature isn’t working correctly, don’t worry. In this article, we’ll discuss the Dodge Challenger Push to Start Problem and provide some helpful tips on how to diagnose and fix it yourself.
We’ll cover what could be wrong with the wiring, battery, key fob, or other components in your vehicle that are causing this problem. By understanding these potential issues and taking the right steps to troubleshoot them, you can get your push-to-start feature back up and running in no time.
What is a Dodge Challenger Push to Start & How Does It Work?
The Dodge Challenger Push-To-Start is an innovative technology feature that is available in select trims of the Dodge Challenger. This technology feature allows you to start your car with the press of a button, making it easier and more convenient than ever to get on the road quickly.
With this feature, you no longer need to insert your key into the ignition or use a traditional keyless entry system. The Dodge Challenger Push-To-Start system operates by sending a secure wireless signal from a remote fob that has been programmed to your vehicle.
When the fob is close enough to the vehicle, it will detect this signal and allow you to push the start button on your dashboard. After verifying that it is indeed you starting up your car, it will then initiate engine ignition and allow you to drive away.
A keyless ignition system’s fob can be kept in a pocket, handbag, briefcase, or other location within range of the vehicle’s receiver. When you press a button on the dashboard or console, the car’s computer system checks to make sure the correct signal was transmitted from the fob, and then the engine will start.
Pressing the start/stop button is also all it takes to turn off the motor. Most systems also have keyless entry, which eliminates the need for a physical key or remote fob to get access to the vehicle.
Despite the widespread availability of keyless ignition systems, especially on budget automobiles, these devices have not yet become automotive necessities like power windows and door locks.
However, the ease of use is a major selling feature for many consumers. Those who have difficulty grasping and turning a key, such as those with arthritis or other infirmities, may find this to be a great benefit.
Read More > How Reliable The Dodge Challenger Is!
The Most Common Causes of Dodge Challenger Push Start Failure
Dead Key Fob
If the key fob is not in the car, the keyless entry system will not allow you to start the engine. Without a functioning battery in the key fob, the car will not be able to detect that you are in possession of it and will not start.
If you place the key fob on the engine start button and press down, you can bypass this problem. The engine should now start, but it’s still a good idea to replace the fob batteries as soon as possible.
Dead car battery
In the event that your key fob is operational but your vehicle’s engine refuses to start, the problem may lie in the vehicle’s battery. Checking the battery voltage with a voltmeter will help you determine if this is the issue.
If the car’s battery voltage is lower than 12.4, additional power will be required to turn the ignition key. Both charging cables and jump starters are available for use.
If your starter isn’t working, you won’t be able to start your car. Try to jump it directly if you suspect a faulty starter. If that doesn’t get your engine cranking, it could be time to replace the starter, or at least the solenoid, module, or relay that controls it.
If the key fob and other components of your vehicle appear to be in good operating order, but the push-button start system still isn’t functioning, the problem may lie with the system itself. In the event of any technical difficulties, be they arising from faulty programming or a broken “start engine” button, professional assistance is required.
How to Diagnose the Problem and Fix It Yourself
Check that the brake is firmly applied
Pressing the brake triggers the push-button start system, which then starts the engine. We would suggest applying slightly more pressure on the gas pedal and trying to start the car again.
It’s possible that the starter is damaged
In the event that your Honda’s push-button starter starts intermittently, it may be time to replace the starter. Another possible cause is a dead battery, either in the ignition or the key fob.
Don’t second-guess yourself; just start over
When the push-button start system of a vehicle is repeatedly pressed, it can become impossible to start the vehicle. Before attempting again, we recommend getting out of the car and back in using the remote.
When Should You Take Your Car to a Professional Mechanic?
Taking your car to a professional mechanic can be a wise decision if it is not running properly or if you have recently encountered an issue with it. Professional mechanics are experienced in all aspects of automotive repair and maintenance and can provide you with the best advice on how to fix your car.
Furthermore, they have access to the latest tools and technology that may be necessary for diagnosing or repairing your vehicle. Taking your car to a professional mechanic gives you peace of mind that the job will be done correctly and safely.
You may have encountered a push to start issue. This is a common problem among Dodge Challengers and can be fixed with the right approach. However, if the issue persists, it’s time to take your car to a professional mechanic for help.
In this article, we’ll take a look at when you should take your car to a professional mechanic for help in fixing your Dodge Challenger push to start issues.
Conclusion: Fixing Your Dodge Challenger Push To Start Issues
If you own a Dodge Challenger, you may be familiar with push to start issues. These issues can range from batteries that don’t hold a charge to faulty wiring. Fortunately, there are some simple fixes that can help you get your push-to-start feature working again.
In this article, we discussed the most common causes of push-to-start issues in the Dodge Challenger and how to troubleshoot them.