How Many Camshaft Position Sensors Are In A Car – Details Explained!

A camshaft position sensor is a vital component of a car’s engine. The sensor helps to ensure that the engine is running smoothly and efficiently by monitoring the position of the camshaft.

There are typically two camshaft position sensors in a car’s engine – one for the intake camshaft and one for the exhaust camshaft. The position of each sensor is monitored by the engine control unit (ECU) and used to adjust the timing of the engine’s ignition and fuel injection systems.

If either sensor fails, it can cause the engine to run erratically or even stall. Therefore, it is important to know how to identify a faulty camshaft position sensor and how to replace it.

See more: How many camshaft sensors are in a car?

What is a Camshaft Position Sensor?

A camshaft position sensor is a small electrical device that monitors the position of the camshaft in an engine. The sensor is usually located near the camshaft pulley or sprocket.

The camshaft position sensor tells the engine control unit (ECU) when to fire the spark plugs and inject fuel. It is an important component of the engine’s ignition and fuel injection system.

See more: can low oil cause camshaft position sensor?

The Purpose of a Camshaft Position Sensor

The camshaft position sensor is used by the engine control unit (ECU) to synchronize the firing of the spark plugs and the injection of fuel. And the ECU uses the camshaft position sensor signal to determine the position of the pistons as they reach the top of their stroke. This information is used to calculate the timing of the ignition and fuel injection systems.

So, if the camshaft position sensor is not working properly, the ECU will not be able to synchronize the ignition and fuel injection systems correctly. This can cause the engine to run erratically or stall.

Related spark plugs: best spark plug for Subaru Outback.

How to Identify a Faulty Camshaft Position Sensor

There are a few symptoms that can indicate a problem with a camshaft position sensor:

1. Engine stalls or is challenging to start: If the camshaft position sensor is malfunctioning, this can lead to the engine stalling or being challenging to start.
2. Engine misfires or runs Roughly:  Another reason why a camshaft position sensor may need to be replaced is if the engine misfires or runs roughly. This can be caused by the sensor not providing the correct information to the engine computer, which can cause the engine to run poorly.
3. Ensure engine light is on: An illuminated check engine light usually indicates a problem with the camshaft position sensor.
4. The engine hesitates or stutters: If the engine hesitates or stutters, it might be because the camshaft position sensor is not delivering accurate data to the engine computer. This can lead to poor engine performance.
5. Fuel economy suffers: If the camshaft position sensor malfunctions, fuel efficiency suffers. This is because the sensor is not sending accurate data to the engine computer, causing the engine to run inefficiently.

So, in case you notice any of these symptoms, it is important to have the camshaft position sensor checked by a qualified mechanic.

How to Replace a Camshaft Position Sensor

If a camshaft position sensor is faulty, it will need to be replaced. This is a relatively simple task that can be completed in a few steps:

1. Locate the camshaft position sensor: The sensor is usually located near the top of the engine, on the front or rear of the cylinder head. 
2. Disconnect the electrical connector from the sensor: Use a small screwdriver or other tools to disconnect the electrical connector from the sensor. 
3. Remove the sensor from its mount: To remove the sensor, use a wrench and rotate the bolt. 
4. Install the new sensor in the mount and reconnect the electrical connector: Now, install the new sensor in the mount and tighten up the sensor. After that reconnect the electrical connector.
5. Start the engine and check for proper operation: When all the process is over, start the engine and check for proper operation. If the engine does not start, or if it stalls, the sensor may not be installed correctly.

If you are not comfortable performing this task, it is best to leave it to a qualified mechanic.

The Benefits of Having a Camshaft Position Sensor

A camshaft position sensor is a vital component of a car’s engine. The sensor helps to ensure that the engine is running smoothly and efficiently by monitoring the position of the camshaft. Let’s see some of the benefits of having a camshaft position sensor: 

1. Helps keep the engine running smoothly: By monitoring the position of the camshaft, the sensor helps to ensure that the engine is running smoothly.
2. Ensures the engine is running efficiently: The sensor also helps to ensure that the engine is running efficiently by adjusting the timing of the ignition and fuel injection systems.
3. Prevents engine damage: If the sensor fails, it can cause the engine to run erratically or even stall. This can lead to engine damage.
4. Improves fuel efficiency: By ensuring the engine is running smoothly and efficiently, the camshaft position sensor can help to improve fuel efficiency.
5. Helps to diagnose engine problems: The camshaft position sensor can also be used to diagnose engine problems. If the sensor is not working properly, it can indicate a problem with the engine.

See more: Toyota 3.5 v6 engine problems.

The Downside of Not Having a Camshaft Position Sensor

If a camshaft position sensor fails, it can cause some engine problems. let’s see:

1. Engine may stall: If the camshaft position sensor is not working properly, the engine may stall.
2. Engine may misfire: The engine may also misfire or run Roughly if the sensor is not working properly.
3. Check engine light may be illuminated: The check engine light may be illuminated if the sensor is not working properly.
4. Engine may hesitate or stutter: The engine may hesitate or stutter if the sensor is not working properly.
5. Fuel efficiency may decrease: The fuel efficiency may decrease if the sensor is not working properly.

Final Words

A camshaft position sensor is a vital component of a car’s engine. The sensor helps to ensure that the engine is running smoothly and efficiently by monitoring the position of the camshaft. 

In case the position sensor fails, it can cause the engine to run erratically or even stall. Therefore, it is important to know how to identify a faulty camshaft position sensor and how to replace it.