Honda CRV Won’t Start But Battery Is Good – Detail Explanation RIGHT NOW!
If your Honda CRV won’t start but the battery is good, there are a few possible explanations. It could be a problem with the starter motor, the ignition switch, or a faulty fuel pump.
The most common reason is the starter mortar problem which is commonly notified when you turn the key but the starter mortar won’t start. The starter is a small motor that turns the engine over, and if it’s not working, the engine won’t start. This is usually caused by a bad starter relay, a bad starter solenoid, or a bad starter motor, not getting power from the battery.
In this article, we’ll go over some of the most common reasons why your Honda CRV won’t start and how to fix them.
See more: Honda CRV won’t start clicking noise
Potential Reasons for honda CRV won’t start but the battery is good
Starter Motor
The starter motor is responsible for turning the engine over when you first turn the key. If the starter motor is bad, the engine won’t start.
Ignition Switch
The ignition switch is in charge of supplying electricity to the starting motor. If the ignition switch fails, the starting motor will not receive the electricity it needs to start the engine.
Related article: How to turn on ignition without starting engine push start.
Other Less Common Reasons
There are a few other less common reasons why your Honda CRV might not start, but if the battery is good, it’s most likely one of the two issues above. Let’s see some of the reasons:
- Loose or corroded battery terminals: If the terminals are loose, they may not be making a good connection, which can prevent the starter from getting the power it needs.
- Dead battery: If the battery is dead, it won’t be able to provide the power needed to start the engine.
- Faulty starter relay: The starter relay is responsible for sending power from the battery to the starter motor. If the starter relay is bad, the starter motor won’t get the power it needs to turn the engine over.
- Starter solenoid issue: It’s possible that the starter solenoid is bad, which would prevent the starter motor from getting power.
- Fuel system issue: When you turn the key, the fuel system has to provide the fuel needed for the engine to start. If there’s a problem with the fuel system, the engine won’t start.
- Engine sensor issue: The engine needs various sensors to be working properly in order to start. If one of the sensors is not working, it can prevent the engine from starting.
So, these are some of the potential reasons for honda CRV won’t start but the battery is good.
How to Fix the problem?
If your Honda CRV won’t start and you are thinking the battery is good, you have to diagnose and fix the problem. the first thing you have to ensure is your battery is not weak. Sometimes it is common that you can see the battery is functioning but failed to measure that the battery is weak enough to process all the work.
You will need a voltmeter to check your car battery is okay to use. here you have to connect your volt meter to the batter and then if the voltage of the batter is above 12.4V then the battery is ok. otherwise, you may need to change your battery to resolve the problem.
Another potential cause of not starting the car is a faulty starter motor. To check the starter motor, you’ll need a multimeter. First, disconnect the negative terminal of the battery. Then, locate the starter motor and remove the starter solenoid wire.
Next, touch the black multimeter leading to the starter solenoid wire terminal and the red multimeter leading to the battery positive terminal. If the multimeter reading is more than 1 volt, then the starter motor is bad and needs to be replaced.
In case the battery and motor are totally Ok then the problem might be with the ignition switch. To check, you’ll need a test light. First, disconnect the negative terminal of the battery. Then, locate the ignition switch and remove the connector.
Next, touch the test light to the battery-positive terminal and then touch the other end of the test light to each of the wires in the connector. If the test light doesn’t light up, then the ignition switch is bad and needs to be replaced.
By following this guide, it will be easier for you to do your car maintenance if it is having trouble starting. But if you don’t have proper repair knowledge about cars then it is better to go for a car mechanic.
Related ignition switch replacement: Dodge Ram ignition switch replacement
Frequently Asked Questions
1. Where is the starter relay located on Honda CRV?
On a Honda CRV, the starter relay is located in the engine bay, on the u003cstrongu003eu003ca href=u0022https://madisonrising.com/subaru-driver-side-window-not-working/u0022 target=u0022_blanku0022 rel=u0022noreferrer noopeneru0022u003edriver’s sideu003c/au003eu003c/strongu003e. It is a small, black box, and is usually located near the battery.
2. Can a blown fuse prevent a car from starting?
A blown fuse in your car can actually prevent the car from starting. The fuse is there to protect the electrical system in your car and if it is blown, it means that there is an electrical problem. If the fuse is preventing the car from starting, you should take it to a mechanic to have it checked out.
3. What sensor would stop a car from starting?
A bad crankshaft position sensor can prevent the car from starting. The crankshaft position sensor tells the engine computer the position of the crankshaft, and the computer uses that information to time the spark and fuel injector pulses. If the sensor is not working properly, the computer won’t know when to u003ca href=u0022https://madisonrising.com/how-long-can-you-drive-with-bad-spark-plugs/u0022u003eu003cstrongu003efire the spark plugsu003c/strongu003eu003c/au003e and the car won’t start.
4. How do you know if an ignition fuse is blown?
When a fuse blows, it’s usually because too much current is flowing through it. The current is what causes the wire to heat up and eventually melt. The fuse is designed to break the circuit and stop the current from flowing if it gets too high. You can usually tell if a fuse is blown by looking at it. The wire inside the fuse will be melted or broken.
5. Why will my car start sometimes and sometimes it won t?
If youru003ca href=u0022https://madisonrising.com/car-struggles-to-start-but-runs-fine/u0022u003e u003cstrongu003ecar is having trouble startingu003c/strongu003eu003c/au003e, it could be for a number of reasons. The most common reason is that the battery is low on power. This can happen if you leave your lights on overnight, or if the battery is getting old. Another possibility is that there is a problem with the starter motor. This is a more serious problem that will require a mechanic’s help.
6. How much does it cost to replace a starter?
The average cost to replace a starter is between $350 and $450. However, the cost can vary depending on the type of car you have and the location of the starter. If you have a luxury car, the cost to replace the starter will be higher than if you have an economy car. The location of the starter can also affect the cost. If the starter is easy to access, the cost will be less than if the starter is difficult to access.
Final Verdict
In case your Honda CRV won’t start but the battery is good, it’s most likely due to either a failed starter motor or a problem with the ignition switch. If you’re having trouble starting your Honda CRV, the first thing you should do is check the battery. If it’s good, then the next step is to check the starter motor and ignition switch.
